Overview

The iJoy Captain PD270 has a sleek design and is one of the best tanks on the market today. It is a really awesome product because your e-juice comes out with the richest flavor from this tank. The thread-less coil system makes it fast to change the atomizer.

Packaging and Contents

The iJoy Captain comes in a black and white cardboard box. You can see the image of the mod in front of the box and there is also a small description printed on it. At the back of the cardboard box is a list of the box’s contents and the device’s features.

The box contains a micro-USB cable that can be used for charging and upgrading the firmware. There are two brand new 20700 batteries and a silicone adapter to be used for the 18650 batteries. There is a user manual that is also in the box.

Design and Quality 

This device can accommodate two 20700 batteries that is why its design is bulky. You are able to have an atomizer of up to 30mm in diameter with the iJoy Captain. It is 89mm by 48mm by 32mm in size.

Carbon-fiber stickers can be seen covering the device’s body. The iJoy Captain has 54 color combinations. When you get to hold the mod, you can feel that its sides are glossy and really feels good in your hands. The stickers are firmly attached to the body so you do not have to worry for these to peel off.

There is a large square shaped fire button that you can see taking up the entire upper half of the mod.  This is used to activate the iJoy Captain. When you check on the other side of the mod, you will see plus and minus buttons. These are located just under the OLED display. The USB port is located below the plus and minus signs.

At the bottom of the device is the battery door. You can open this easily, you just have to slide it outwards and push it up open. The 18650 battery can be used as a back up to operate the mod. You just have to insert the battery into the silicone adapter and insert this into the compartment.

Menu System and Navigation

Pressing the fire button three times leads you to the device’s menu. You are then presented with five icons. These icons are, Power Mode (Pw), Temperature Control (Tc), Temperature Coefficient of Resistant (TCR), Settings (SET), and Reset Puff. The last icon lets you reset the puff counter of your mod. You can use the plus and minus buttons to navigate from one icon to another. You also can access the icon’s respective sub-menus by holding down the fire button.

A preheat option is in the power mode. You can choose from soft, hard, normal, and user settings. The user setting can open up an advanced menu where you are able to set a custom preheat chart. You can set if for the first 3 seconds of the draw. This option gives you the freedom to customize your vaping experience depending on how you want it. This may not be advisable for beginners.

The material that you want to use can also be changed in the Temperature Control Menu. You can choose from stainless steel, titanium, and Ni200. On the same menu, the wattage of your device can also be changed. You just have to press the plus button and wait for a blinking letter W. Once you see W, you then are able to change the wattage. The minus button can be used to adjust the temperature of your tank.

Conclusion

The iJoy Captain PD270 is one of the best box mods available on the market today. There are similar products but this one is made from high-quality materials. What’s great about this mod is you are able to purchase it right away at https://www.urvapin.com/. It is sold at a very reasonable price of $43.99. You know that you are getting the best value for your money.

About The Author

Related Posts

Leave a Reply

Your email address will not be published.