Eleaf iStick iPower Nano is yet another mod packed with so much power and features compressed inside a very small, handy mod. The iPower Nano is a mini version of the original iPower. Its wattage ranges between 1 watt and 40 watts with a minimum resistance of 0.05 ohms for temperature control and 0.1 ohm for wattage and bypass modes. Temperature ranges from 100oC to 315oC, with control for nickel, titanium, and stainless steel. It features three memory settings for temperature coefficient of resistance (TCR) mode also.
Despite its relatively portable size (measuring only 55mm in height and 38 mm in width), you should not underestimate the iPower Nano’s capabilities as it is packed with the same features as its big brother. It is powered by a 1,100 mAh internal battery and uses a micro-USB charger found at the bottom part of the mod. Although it has a pass-through feature (which means you can charge and vape at the same time), this practice is highly discouraged (you know, just to eliminate possible accident risks). The device could be charged using a laptop or another power source, and charging time can take up to 3 hours.
The iPower Nano comes with a 22-mm Melo 3 tank, one of Eleaf’s latest tank. It is made of high quality stainless steel and Pyrex glass, is capable of storing up to 2 ml of e-juice (satisfies European regulations), and has top-fill capabilities that make refilling a no-sweat task. It also comes with a 0.75 ohm mouth to lung coil and 0.3 ohm direct lung coil. All parts could easily be disassembled, so cleaning is easy breezy work. The Eleaf Melo 3 has an invisible adjustable airflow control valve as it is hidden inside the tank. When used with the 100% pure cotton Eleaf EC Kanthal/TC-Nickel/EC-TC-Titanium atomizer heads, the Eleaf Melo 3 Nano will give you an outstanding vaping experience when paired with the iStick Power Nano. The chip on board can also detect the kind of metal your coil is made from, so do not try to trick it with Kanthal. Your chip can easily spot it!
A piece of advice: it is best if you pick a coil for the Melo 3 that will suit the mode you are operating. You could go for a coil of 0.1 to 3.5 ohms in variable watt, bypass, or smart mode, whereas you should use coils between 0.05 ohms and 1.5 ohms when in the TC setting. The bypass mode works like a mechanical mod in that it gives you direct firing without restrictions. The smart mode, on the other hand, remembers your wattage setting for various wire resistance. This is a great option for those who are fond of switching modes to discover the perfect configuration for their specific preferences.
It has an OLED screen that displays the mode you set and the resistance it reads. Error codes such as overheating, short circuit, and low voltage warnings also appear here. The Dual Circuit Protection (DCP) installed on this device gives you that extra layer of protection.
The mod boasts to be tiny yet efficient. It commits to deliver satisfying amount of vapor. This kit is a perfect match and will give a wonderful vaping experience with nice flavor particularly for mouth to lung vaping. The starter kit is up for grab for as low as AUD $54.95 at https://caktusvape.com (available in color white). Included in the box are an iStick Power Nano Mod, a Melo 3 Nano Tank, an ECML 0.75 ohm coil, an EC 0.3 ohm coil, a seal ring, a user manual, and a USB cord.
Another piece of advice for newbies; e-liquids with nicotine concentration level of 6 mg or lower are recommended with this atomizer. Sub-ohm atomizers tend to produce higher throat hit than lower and standard resistance atomizers and using e-juices that contain more than 6 mg will usually give you a burnt or harsh taste. That being said, the mouth-watering blends of Caktus Juice are a perfect pair for this on-the-go kit. Theyhave eight uniquely blended fruity flavors including Berry Crunch, Tangy Grape, Strawberry, Tangy Apple, Strawberry Cream, Watermelon, and Pineapple. All flavors are available at 0 mg and 3 mg nicotine strengths for the cheapest price of AUD $15.95 for a 30-ml bottle only at Caktus Vape.